Adjust parameters including photo overlap ratio, altitude, shooting angle — parallel or vertical to the main flight path — course angle, and margin.
Capture images at equal time intervals, equal distance intervals, or to hover at a waypoint during capture. Two Flight Course Modes are available: Inside Mode, in which the aircraft follows an automatically generated routed within the chosen area, and Scan Mode which provides the fastest route to cover a designated area.
To achieve better 3D reconstruction, the default photo overlap is optimized for a range of supported cameras.
It can also be independently adjusted. Simply choose the subject and set a distance between it and the aircraft. DJI GS Pro will then provide relevant parameters including speed and time required to circuit the structure.
Images captured can be exported into 3D reconstruction software to create accurate 3D models of the entire building. Learn more. After the geometries have been successfully imported, users can swipe left on the geometry list in the Map Panel, and GS Pro will automatically generate a flight mission according to the geometry field, helping users to conduct mapping with accuracy and ease.
Mapping with GS Pro becomes even more flexible by adjusting waypoints. Learn More. Choose one of the pre-installed cameras pre-sets or create a new one to suit your camera.
Alternatively, the Area Scan and Photogrammetry parameters can be adjusted manually, such as GSD, overlap or desired altitude. The tool for vertical scanning allows to plan a vertical plane, specify the distance to the wall, as well as side and forward overlap.
The optimal flying path is calculated automatically. The tool is also extremely useful in mining for examining open quarries.
The exact altitudes above sea level at all points provides the ability to plan drone missions with respect to the surrounding. The telemetry data window in UgCS displays telemetry data including the charge level of the battery, radio link and GPS signal quality, current course and heading, speed, altitude and much more.
UgCS enables multiple flight modes. The manual flight mode allows controlling the drone with the remote control.
Once a flight plan is created and uploaded to the autopilot the Automatic flight mode can be used. There are in-built software emulators for quadrocopters and fixed wing drones -emucopter and emuplane.
It enables to test a route before uploading it to a real drone. We really take a use case approach to app design. For instance, rather than throwing a bunch of features at a user and expecting them to spend a ton of their own time learning how to use those features, we take a different approach and really think around what the user wants to accomplish with their drone and with the app.
With the new updates coming online soon, we are now adding additional abilities to allow for really dynamic shots and meticulous planning, but we continue our focus on the interface being as easy to use and intuitive as possible.
New drone users will make great use of the easy to use Path tool, and when they are ready for something a little more dynamic, the Plan tool will be there for them.
Litchi is one of the most popular autonomous flight apps on the market. With a few simple clicks and taps users can set up flight plans that go way beyond a simple waypoint mission engine.
The days are shorter by the end of the daylight saving time. If you like running — this makes it nearly impossible to train without running in the dark.
But even for geocaching or […]. You like lambs? Also wenn ich zu einem Ziel fliege was 30 Meter höher liegt und es in 30 Meter höher umfliegen möchte, muss ich dann die Höhe beim Waypoint auf 60 Meter stellen?
Schau mal hier: Das könnte Dich interessieren Link klicken. Ja, die Höhe bezieht sich immer auf die Höhe Null am Startort.
Through continuous innovation and product updates since then, SimActive remains at the forefront of innovation in this industry.
The Correlator3D software is a patented end to end photogrammetry solution for the generation of high quality geospatial data from satellite and aerial imagery, including UAVs.
For more information, visit SimActive. Here is a nice short video which shows you how to process imagery using the SimActive Correlator3D software.
They also host your maps rather than you having to save and process them locally. This is how Maps Made Easy works. Fly any drone or aircraft and capture the aerial images.
Maps Made Easy processing works with images taken from any aerial platform. You capture the images, upload the images to Maps Made Easy. They will stitch the photos into 3D maps using powerful processing servers and their own 3D photogrammetry software.
They also take care of the storage of the data and 3D maps with their hosting solution. The Maps Made Easy free version is great for small jobs.
There is no resolution limits or subscriptions required. The textured 3D model can be downloaded and previewed online.
There is no expensive software to buy and the measurements can be made directly from your web browser. Volumetric measurements are easily shared with others and are stored to track progress over time.
You can build and quickly view a history for every point on the map. This feature is especially useful for construction monitoring, agriculture, pipeline documentation and solar array inspection.
It takes a lot of computing horsepower and processor time. If you were to attempt to do the same processing that Maps Made Easy are doing on their purpose built server, you would likely not have the system resources or not be able to use your computer for hours on end.
You can find the full list of Maps Made Easy guide videos here. You can also view some Maps Made Easy photogrammetry samples here. This photogrammetry software can even to generate high definition videos, without the need of external tools.
There is various packages available from 3DF Zephyr. Compare the various 3DF Zephyr features here between their free and paid photogrammetry software.
The various 3DF Zephr paid packages, give you anything from to unlimited photos, basic to advanced editing tools along with full exporting capabilities.We Maxime Janvier to Autoflight founder Jim McAndrew, for a little Thinkmarkets insight into why Autopilot might be Wetten Champions League right app for you. The days are shorter by the end of the daylight saving time. Pix4DMapper photogrammetry software allow you to generate professional 3D models and maps from images. Mapping with GS Pro becomes even more flexible by adjusting waypoints. Proceed to Checkout. August - Der Kontroller sieht ja wieder völlig anders aus. Set a waypoint flight path, define waypoint actions, then start flying with a tap. After the aircraft finishes its flight mission, it can be set to Return to Home, Hover, or Land. The WingtraOne covers hectares at 0. Some people use the terms interchangeably, however, there is a distinct difference between the two. New to breeding plecs. Are shrimp safe with bristlenose plecos?